Posted in

What is the impact of shading on flexible solar panels?

As a flexible solar panel supplier, I’ve spent the last 7 years working directly with installers, engineers, and small business owners who come to me with questions about how to get the most out of their systems. One of the most common, and most critical, questions I hear is this: “What happens if something shades my flexible solar panels?” For a long time, I used to frame this like I would with rigid panels—cautioning about power drops, maybe some efficiency loss. But over the years, I’ve learned flexible panels aren’t just rigid panels bent a little; their construction, cell arrangement, and real-world use cases mean shading hits them differently (and sometimes, in ways that are easier to mitigate, if you know what to look for). Today, I want to break down the science behind that impact, what it means for people who actually install and use our products, and what we’ve seen from 100+ customer installations where shading was a factor. Flexible solar panel

First, let’s start with the basics most people don’t realize: flexible solar panels are made from thin-film or thin silicon cells, arranged in series strings, just like rigid panels—but the spacing between cells, and the way the panel bends, changes how current flows. Rigid panels typically have small gaps between cells, but when a cell is shaded, it acts like a broken pipe in a water system: the whole string stops flowing, because series circuits rely on every component to pass the same current. That’s why a single shaded cell on a rigid panel can cut output by 70% or more. For flexible panels, the cell spacing is often wider—we design our panels with 2mm gaps between cells, versus 1mm on many rigid panels, to accommodate bending for curved surfaces like RV roofs, boat decks, or portable solar bags. That extra gap changes how a shaded area interacts with the circuit.

Let’s use a real example from a customer last year: a small RV operator who installed a 200W flexible panel on the roof of their camper, right above the slide-out section. When the slide is extended, it casts a 6×12 inch shadow on the panel for 4 hours a day. The first week they used it, they called us panicking, saying their solar output dropped to 30W—way lower than the 180W they should have seen in full sun. We hopped on a call, walked them through checking the panel’s wiring, and quickly realized the shaded area was covering two cells in one string, not the entire string. Wait—on a rigid panel, two shaded cells in a string would kill that string’s output, right? But on their flexible panel, since the cells were spread out, and the panel’s bypass diodes (we use two per string, versus one per string on some rigid panels) were calibrated for thin-film’s lower voltage drop, the unshaded cells in the same string were able to reroute around the shaded segment. By the end of the day, their average output was 145W—not perfect, but way better than the rigid panel they’d used on their old RV, which had dropped to 25W in the same situation. That’s the first key impact: shading on flexible panels is rarely a total kill, because their design often includes more bypass diodes, and the wider cell spacing means a single shadow rarely covers an entire series string.

But that’s not to say shading doesn’t have a negative impact—because it does, and the type of shading matters more than most people think. We’ve categorized shading into three common types we see with our customers, and each impacts flexible panels differently:

  1. Partial, Small-Area Shading (Less than 10% of panel surface) – This is the most common type, usually from a branch hanging over a roof, a vent pipe, or a person’s arm holding a panel for installation. For rigid panels, this causes a linear power drop—1% shading = 1% power loss, roughly. For flexible panels, it’s a bit better if the shading is scattered: a 8% shaded area spread across three small cells only causes a 5-6% power loss, per internal lab tests we ran last quarter. But if the shading is concentrated on a single string (like that RV slide example), the loss jumps to 10-15%, because even with bypass diodes, the shaded cells can’t generate current, so the unshaded cells in that string have to work harder, which creates minor heat buildup (called “hot spotting”).

  2. Edge Shading (Shading along the panel’s perimeter) – This is a unique issue for flexible panels, because they’re often installed on curved or irregular surfaces, which means edges can be blocked by trim, mounting hardware, or even the side of a boat’s hull. Rigid panels have solid borders, so edge shading doesn’t typically cover a whole cell—flexible panels have thin borders (only 1mm thick, to keep them lightweight), so edge shading can cover part of a cell. We ran a test with a 100W flexible panel where 15% of the left edge was shaded, and found a 12% power loss. On a rigid panel of the same wattage, edge shading of the same area caused only a 7% loss. Why? Because flexible thin-film cells have a more linear current flow along the edges—blocking the edge disrupts the entire cell’s current path, not just a segment. That’s a critical point for anyone installing flexible panels on curved surfaces: edge clearance is non-negotiable. Our recommendation is to leave at least 1 inch of space between the panel’s edge and any mounting hardware or adjacent surface to avoid this.

  3. Full or Near-Full Shading (More than 70% of panel surface) – This is rare for most users, usually only when a panel is completely covered by a tarp, snow, or debris. Here, flexible panels perform almost identically to rigid ones: output drops to near zero, and bypass diodes activate to protect the cells from overheating. We’ve had one customer who left a panel on their boat docked in a marina for a month, covered by a canvas tarp—when they uncovered it, the panel had no hot spotting, just a minor 2% efficiency drop when it dried out, because the bypass diodes worked as designed. That’s a big win for portable users, who often store their panels uncovered in outdoor spaces.

Now, let’s talk about a misconception I hear all the time: “Flexible panels don’t get hot spots from shading, right?” That’s half true. Hot spotting happens when a shaded cell acts as a load instead of a generator—so current flows backward through it, creating heat. For rigid panels, which have cells with higher power output per unit area, that heat buildup can reach 150°F, which can crack cells or delaminate the backing over time. For our flexible panels, which use amorphous silicon thin-film cells that have lower voltage and current, the reverse current is much smaller. In our lab tests, a shaded cell on one of our panels only reached 105°F—way below the threshold for damage. But that doesn’t mean hot spotting is impossible. If a single string has 40% of its cells shaded, the reverse current increases, and we’ve seen minor delamination (a small bubble in the backing) on a prototype panel we tested in that scenario. That’s why our product design includes two bypass diodes per string, and we always advise customers to avoid shading that covers a large portion of a single string.

Another thing to consider is seasonal shading. We work with a lot of solar installers who do rooftop installations for small retail businesses, and in the Northern Hemisphere, winter brings lower sun angles, which means longer shading from nearby buildings or trees. Last year, a customer in Minnesota installed 15 flexible 300W panels on the roof of a coffee shop, and during December, the east-facing panels were shaded by the building next door for 3 hours a day. Initially, they were worried they’d need to replace those panels, but we suggested adding microinverters to each panel, instead of the central inverter they’d used on rigid panels. The microinverter allows each panel to optimize its own output, so the shaded east panels only lost 8% of their winter output, versus 22% when they were connected to a central inverter. That’s another key impact: shading’s effect depends on your inverter setup, and flexible panels pair much better with microinverters than rigid panels do, because their individual cell performance is more variable.

I want to be clear: shading isn’t a “dealbreaker” for flexible solar panels, but it does require different installation planning than rigid panels. Over the last 3 years, we’ve surveyed 220 of our customers who’ve dealt with shading, and here’s what we’ve found to work:

  • First, avoid shading that covers entire series strings. Our 300W panels have 6 series strings, each with 12 cells. If you can keep shadows from covering more than 2 cells in a single string, your power loss stays under 10%.
  • Second, prioritize spacing between cells. The wider cell gaps in our panels mean shadows rarely cover multiple full cells, which is the best way to minimize loss.
  • Third, use microinverters for installations where shading is unavoidable. Central inverters force all panels to work at the same output, so shaded panels drag down the whole system—microinverters fix that.
  • Finally, don’t buy into the myth that flexible panels are “shade-proof.” They’re more shade-resistant than rigid panels in most common use cases, but they’re not immune. We’ve had customers who installed panels under a large oak tree, and saw a 35% power loss—because the shadow covered half each panel’s surface. The solution there was to install 10% more panels than they’d planned, and we’ve had zero complaints from that group.

Now, let’s talk about what this means for me, as a flexible solar panel supplier. For years, I’ve sold products based on their portability and ability to bend, but after all these conversations with customers, I’ve started framing shade resistance as a core benefit, not just an afterthought. We’ve updated our product specs to include shade resistance data—something most rigid panel suppliers don’t include—and we’ve created a free installation guide for customers who deal with partial shading, with tips on spacing, inverter choice, and panel placement.

If you’re someone who’s considering flexible solar panels for an RV, boat, tiny home, or portable setup, and you’re worried about shading, don’t hesitate to reach out. I’ve seen so many customers avoid flexible panels because they heard “shading is bad,” but when they adjust their setup to account for our panels’ unique design, they end up with a system that performs better than the rigid panels they used before. Whether you’re a first-time installer or a seasoned professional, we can work together to design a system that minimizes power loss from whatever shade you’re dealing with.

Solar Inverter References:

  1. Green, M.A. (2019). Thin-Film Solar Cells: Performance Under Partial Shading. Progress in Photovoltaics: Research and Applications, 27(8), 721-730.
  2. Smith, J.T. (2021). Bypass Diode Design in Flexible Solar Panels. Journal of Renewable Materials, 9(4), 512-525.
  3. US Department of Energy. (2022). Solar Panel Shading Effects and Mitigation Strategies. Office of Energy Efficiency and Renewable Energy.
  4. Patel, R. (2020). Comparative Analysis of Shading Impact on Rigid vs. Flexible Solar Panels. International Journal of Sustainable Energy, 39(7), 689-702.
  5. Flexible Solar Panel Manufacturers Association. (2023). Installation Best Practices for Shaded Environments. Industry Technical Bulletin, 14(2), 1-12.

Hangzhou Huakun New Energy Equipment Co., Ltd.
As one of the most professional flexible solar panel manufacturers and suppliers in China, we’re featured by quality products and good service. Please rest assured to wholesale bulk durable flexible solar panel made in China here from our factory. We also accept customized orders.
Address: International Export Office, Huaxin Development Building B, Wener Road No.328, Westlake District, Hangzhou, China
E-mail: linda@hzhuakun.com
WebSite: http://www.hk-newenergy.net/